Stability Test - メーカー・企業と製品の一覧

[Test] Gasoline Oxidation Stability (JIS K2287)

Measuring the time until the pressure drop point! A test to measure the oxidation stability of automotive gasoline.

We would like to introduce our "Gasoline Oxidation Stability" test. A metal pressure-resistant container filled with the sample is pressurized with oxygen and immersed in a constant temperature bath at 100°C. We observe the pressure changes in the cylinder and measure the time until the pressure drops. This serves as an indicator of the tendency for gum formation during storage. Please feel free to contact us when you need our services. 【Test Details】 ■ Item Number: F142 ■ Required Volume: 100ml ■ Standard Number: JIS K2287 ■ Main Target Oil Type: Gasoline *For more details, please refer to the related links or feel free to contact us.

企業：エス・ブイ・シー東京
価格：Other

Testing Equipment and Devices

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Test for the Oxidation Stability of Diesel Fuel (ASTM D2274)

The required amount is 700ml! We will determine the total amount of the filtered residue and the sticky insoluble portion remaining in the test apparatus.

We would like to introduce our "Diesel Oxidation Stability Test." The target oil type is diesel fuel. After immersing the filtered sample in an oil bath at 95°C for 16 hours, we will determine the total amount of the filtered residue and the sticky insoluble matter remaining in the testing apparatus. Please feel free to contact us when you need our services. 【Test Details】 ■Item Number: F153 ■Required Amount: 700ml ■Standard Number: ASTM D2274 ■Main Target Oil Type: Diesel Fuel (including blended diesel) *For more details, please refer to the related links or feel free to contact us.

企業：エス・ブイ・シー東京
価格：Other

Testing Equipment and Devices

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

[Test] Oxidation Stability (Ransimat Method)

Measure the induction time until the inflection point of electrical conductivity! Target includes diesel (including blended diesel) and FAME, etc.

We conduct tests to evaluate the oxidation stability of diesel fuel and FAME. The sample is heated while air is blown into it to induce oxidative degradation. The acidic gases generated by the degradation change the electrical conductivity of water placed in a separate container. We measure the induction time until the inflection point of that electrical conductivity. 【Test Details】 ■Item Number: K855 ■Required Amount: 50ml ■Standard Numbers: EN14112, EN15751 *For more details, please refer to the related links or feel free to contact us.

企業：エス・ブイ・シー東京
価格：Other

Public Testing/Laboratory

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

[Test] Ultrasonic Shear Stability JPI

Determine the viscosity reduction rate of the sample! The JPI method primarily performs irradiation at low voltage.

We would like to introduce our lubricating oil test analysis "Ultrasonic Shear Stability JPI." This test determines the viscosity reduction rate of the sample. The sample is sheared using ultrasound for a specified time, and the viscosity reduction rate before and after shearing is calculated. The JPI method primarily uses low voltage for irradiation. Please feel free to contact us if you have any inquiries. 【Test Details】 ■Item Number: L3194 ■Required Amount: 150ml ■Standard Number: JPI-5S-29 *For more details, please refer to the PDF document or feel free to contact us.

企業：エス・ブイ・シー東京
価格：Other

Contract Analysis

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Cincinnati Heat Stability Test

Evaluate the thermal stability of the sample! Place copper and iron test pieces in a constant temperature chamber at 135°C for a set period of time.

We would like to introduce our lubricating oil test analysis, the "Cincinnati Thermal Stability Test." This test evaluates the thermal stability of the sample. Copper and iron test pieces are placed in a beaker containing the sample, and it is heated in a constant temperature bath at 135°C for a specified period. After heating, the discoloration of the test pieces and the amount of sludge in the beaker are assessed. Please feel free to contact us if you have any inquiries. 【Test Details】 ■Item Number: L318 ■Required Amount: 200ml *For more details, please refer to the PDF document or feel free to contact us.

企業：エス・ブイ・シー東京
価格：Other

Contract Analysis

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Thermal Stability Test

Evaluate the degree of thermal oxidative degradation of the sample! Observe the presence or absence of precipitates at the bottom of the test container.

We would like to introduce our lubricating oil testing analysis, the "Thermal Stability Test." This test evaluates the degree of thermal oxidative degradation of the sample. The sample is heated under specified conditions, and the presence or absence of precipitates at the bottom of the sample and test container is observed. The required amount is 100ml, and the standard number is JIS K2540. Please feel free to contact us if you have any requests. 【Features】 ■ Item Number: L317 ■ Required Amount: 100ml ■ Standard Number: JIS K2540 *For more details, please refer to the PDF document or feel free to contact us.

企業：エス・ブイ・シー東京
価格：Other

Contract Analysis

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

[Test] Lubricating oil for internal combustion engines Oxidation stability: ISOT

Oxidize the sample at 165.5℃ for 24 hours! Determine the increase in viscosity ratio and acid value.

We would like to introduce our lubricating oil testing analysis "Oxidation Stability of Lubricating Oil for Internal Combustion Engines: ISOT." This test evaluates the oxidation stability of the sample. The sample is placed in a test container with a metal catalyst and oxidized at 165.5°C for 24 hours. The kinematic viscosity and acid value before and after oxidation are measured, and the increase in viscosity ratio and acid value is determined. 【Test Details】 ■ Item Number: L308 ■ Required Amount: 500ml ■ Standard Number: JIS K2514-1 *For more details, please refer to the PDF document or feel free to contact us.

企業：エス・ブイ・シー東京
価格：Other

Contract Analysis

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

[Test] KRL Shear Stability

Evaluate the shear stability of the sample! Stabilize the temperature and rotate at the specified speed and time.

We would like to introduce the "KRL Shear Stability" lubrication oil test analysis conducted by our company. This test evaluates the shear stability of the sample. A load is applied to the sample, the temperature is stabilized, and it is rotated at a specified speed and duration. After the test is completed, the viscosity reduction rate is calculated from the kinematic viscosity of the sample oil, and the shear stability is assessed. 【Test Details】 ■Item Number: L328 ■Required Amount: 200ml ■Standard Number: CEC-L45-99 *For more details, please refer to the PDF document or feel free to contact us.

企業：エス・ブイ・シー東京
価格：Other

Contract Analysis

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

[Test] Ultrasonic Shear Stability JASO Method

Shear the sample for a specified time using ultrasound! The JASO method is performed with high voltage irradiation.

We would like to introduce our lubricating oil testing analysis "Ultrasonic Shear Stability JASO Method." This test determines the viscosity reduction rate of the sample. The sample is sheared for a specified time using ultrasound, and the viscosity reduction rate before and after shearing is calculated. The JASO method uses high voltage for irradiation. The required amount is 150ml, and the standard number is JASO M347. Please feel free to contact us if you have any requests. 【Test Details】 ■ Item Number: L319 ■ Required Amount: 150ml ■ Standard Number: JASO M347 *For more details, please refer to the PDF document or feel free to contact us.

企業：エス・ブイ・シー東京
価格：Other

Contract Analysis

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Stability Test - メーカー・企業と製品の一覧

Stability Testの製品一覧